Gator Xturf Seam Tape

For high-end synthetic grass installation

Installation Instructions

STEP 1

Place laminated side of the GATOR XTURF SEAM TAPE on the gravel to prevent water absorption from the foundation.

STEP 2

Apply GATOR BLOCK BOND XP Glue in a serpentine or linear pattern.

STEP 3

The linear or serpentine pattern of glue should be 1″ (2.5 cm) inside of each GATOR XTURF edge, both far enough not to spread in the middle of the seam joints. The Goal is to glue approximately 6″ of XTURF from both XTURF rolls on the SEAM TAPE.

STEP 4

Press firmly on XTURF that lies on the SEAM TAPE (12″) to create a strong bonding action.